Centos에서 HP PSP설치

1. hpe.com 에서 서버 모델별 패키지 파일 다운로드
   
   
   
2. snmp 서비스 설치 및 활성화

   $> yum install net-snmp -y

3. 압축 해제

   $> tar -zxvf hp-psp-8.60-8-CentOS.tar.gz
   $> cd psp/CentOS/5/i386/current

4. HP PSP 설치 및 구성하기

   $> yum localinstall ./*.rpm
   $> /sbin/hpsnmpconfig
   
   This configuration script will configure SNMP to integrate with the HP SIM and
   the HP System Management Homepage by editting the snmpd.conf file. The HP-SNMP-Agents can also exist in a more secure
   SNMP environment (e.g. VACM) that you have previously configured. See the
   hp-snmp-agents(4) man page for specific details on how to configure the VACM entries
   in the ‘snmpd.conf’ file. You may press <ctrl+c> now to exit now if needed.
   
   Do you wish to use an existing snmpd.conf (y/n) (Blank is n): 엔터
   
   You will now be asked a series of SNMP configuration questions. How you answer
   these question will affect the way SNMP behaves. Configuring SNMP could have
   security implications on your system. If you are not sure how to answer a
   question, you can abort by pressing and no changes will be made to
   your SNMP configuration.
   
   Enter the localhost SNMP Read/Write community string
   (one word, required, no default): public
   Re-enter the same input to confirm: public
   ACCEPTED: inputs match!
   
   Enter localhost SNMP Read Only community string
   (one word, Blank to skip):
   Enter Read/Write Authorized Management Station IP or DNS name
   (Blank to skip): 엔터
   Enter Read Only Authorized Management Station IP or DNS name
   (Blank to skip): 엔터
   Enter default SNMP trap community string
   (One word; Blank to skip): 엔터
   Enter SNMP trap destination IP or DNS name
   (One word; Blank to skip): 엔터
   The system contact is set to
   syscontact Root <root@localhost> (configure /etc/snmp/snmp.local.conf)
   Do you wish to change it (y/n) (Blank is n): 엔터
   The system location is set to
   syslocation Unknown (edit /etc/snmp/snmpd.conf)
   Do you wish to change it (y/n) (Blank is n): 엔터
   
   ==============================================================================
   NOTE: New snmpd.conf entries were added to the top of /etc/snmp/snmpd.conf
   ==============================================================================
   snmpd is started

5. HP PSP 서비스 실행

   $> /etc/init.d/snmpd start
   $> /etc/init.d/hp-snmp-agents start
   $> /etc/init.d/hpsmhd restart
   $> /etc/init.d/hp-health start
   $> /etc/init.d/hp-asrd start

6. PSP 포트 상태 확인

   $> netstat -antp | grep hp
   ...
   tcp   0  0  0.0.0.0:2381    0.0.0.0:*  LISTEN   9035/hpsmhd
   tcp   0  0  0.0.0.0:2301    0.0.0.0:*  LISTEN   9035/hpsmhd
   ...

7. PSP 접속하기 - http://서버IP:2381/ (계정정보는 root계정과 동일)
   
   

1. psp패키지 삭제절차

   $> yum erase hp*

2. HP 툴이름별 역활

   툴 이름	역 활
   hp-healt	hhp시스템상태 및 명렬줄 유틸리티
   hponcfg	iLO온라인 구성 유틸리티
   hp-snmp-agents	시스템 management snmp 에이전트
   hpsmh	시스템 관리 홈페이지
   hp-smh-templates	홈페이지 템플릿
   cpqacuxe	디스크 구성 유틸리티
   hp-ams	iLO 내부상태 및 경고 지원

    

    

   출처 - http://igoni.kr/books/linux/page/centos-hp-psp

Centos에서 HP PSP설치 | igoni.kr